Engines: Loading/unloading of vehicle motors (waste); lithium-ion battery production
Lube systems: Lubricant transfer; stamping fluid and metal chip removal
Wheels and tires: Mold release agent delivery and rubber compound mixing
Facility wastewater management: Sumps and pits filtering; waste/particulate removal
Paint/spray systems: Pre-cleaning surface; coating and painting application systems
Filter press: remove particulates from metal processing waste before transferring water for reuse
Lubricant dispensing machines: abrasive and corrosive fluids
General loading/unloading and transfer: oil, fuel, machine coolants; bulk and day tank
2. CERAMICS APPLICATIONS
Loading/unloading transfer: critical transfer applications such as bulk storage tanks, day tanks, aging tanks, slip transfer and recirculation and tanker/railcar unloading
Filter press: demanding filter press operations to remove particulates from ceramic processing waste before transferring water and ceramic for reuse
Mixing/batching/coating: challenging ceramic production requiring batch-to-batch consistency of slips and glazes, as well as spray glaze application to the finished product
Molding & casting processing: essential pumping operations to transport and inject slip into molds, as part of gravity-fed and high-pressure systems
Wastewater & sump treatment: vital removal of unwanted water throughout the facility including efficient dewatering sumps often containing oil, slip and ceramic debris
Utility (Portable): General facility transfer to load/unload barrels and totes
Safe Transfer and Mixing: Aggressive, high-risk, or expensive chemical transfer, tank to tote transfer, mixing/blending/extruding applications requiring containment
Wastewater: Sumps and pits, dewatering, filter press, containment and run-off areas, water purification, water treatment, slurry
Aggressive Environmental Conditions: Dirty environmental air, explosive atmospheres, corrosive environments, temperature extremes, high suction lift requirements
Batching: Consistent delivery of uniformity across batch cycles, adaptable to a variety of batch recipes
Injection: Low solvent coatings transfer in dosing applications
Disinfectants: Manufacturing of sanitizers and other disinfectants, including glycerol/glycerin, water triethanolamine, and propylene glycol
4.PAINT, INKS AND COATINGS APPLICATIONS
Loading/Unloading/Transfer: across all steps of the manufacturing process to move raw or partially processed materials to next step production
Premixing: wide range from thin to viscous fluids, resins, oils, solvents, plasticizers, surfactants, glues and liquid pigments
Grinding and milling: processing pigments, colorants and inks to remove clumps and create consistent paste material for batching and dispersion
Batching/mixing/dispersion: pigment paste combined with resins and batch additives using gentle, low shear pumping to prevent damage as creates a flowable material
Straining and filtration: used to adjust the viscosity, tint strength, color, gloss and overall appearance before the batch is considered complete
Filling: outbound containers filled with finished products that range from thin to abrasive and viscous fluids
Wastewater and sump: facility treatment of all liquids generated on-site in its manufacturing process, including water runoff
Filter press: remove byproducts and waste from the manufacturing process. Sludge formed from latex and water-based solvents can be captured, recycled and reused
5.BUILDING PRODUCTS AND CONSTRUCTION INDUSTRY
Structural: Bricks, masonry, blocks, cement
Countertops: Formica, stone cutting, granite, countertop fabricating
Interior Finish: Drywall, wallboard, Insulation and fiberglass
Exterior Finish: Aluminum extrusions and siding
Plumbing and Fixtures: pipes, faucets and bathroom fixtures
Roofing: Shingles, tar paper
Textiles: carpets and flooring
Tiles: ceiling, floor and roof
Glass: Windows and doors
Wood and composites: doors, framing, cabinets
6.WASTEWATER AND ENVIRONMENTAL APPLICATIONS
Loading/Unloading & Transfer: safe handling of hazardous waste, detergents and chemicals
Filter Press: sanitize water for reuse, belt press feed, wastewater solids handling
Municipal Utility: dewatering, solids handling pump using a portable pump
Wastewater: processing includes neutralize, disposal, chemical spill containment, grit and scum removal
Sludge Removal: handling a wide range of content including thickened/clarified/digested sludge and waste activated or return activated sludge (WAS/RAS)
Transfer, Loading/Unloading: extensively used in the pumping of fuel, chemicals, lube and cargo oils, and clean or hazardous drain transfer when chemical compatibility and quick and rapid transfer is critical
Dewatering: various cleanup and water removal using portable and fixed pumps for planned and unplanned events (emergency spill cleanup, sump management or deck stripping/cleaning)
Processing: supporting critical process equipment operations onboard transportation equipment and vessels, such as bilge pumping services and oily/water separation
8.MINING INDUSTRY APPLICATIONS
Dewatering and Sump: Water evacuation at mine face; remove underground water from mine shaft and move to central pond; remove drift water at active mine sites
Filter Press: High-pressure filter press operations to remove particulates from mine water before transferring from pit; allow reusability of filtered water
Mining Methods: Underground, open surface (pit), placer, and in-situ processes used for coal, soft/hard rock, precious metals (like nickel, copper, gold, silver), phosphate, and diamond
Loading/Unloading Transfer: Various fluids including oil, fuel, hydraulic, concrete, de-frothing agent, and sodium bicarbonate and other caustic chemicals or solid-laden fluids
General Transfer: Suction lift removal of viscous fluids containing muck, slimes, slurries, and sludges
9.PULP AND PAPER APPLICATIONS
Loading/unloading/transfer: Chemical transfer, abrasive fluid movement, solids and slurry handling
Sump/wastewater: Heavy sludge and line-size solids
